Can I improve the accuracy of the fingerprint scanner? Follow

YES. By activating your fingerprint scanner, you are adding another level of security to your HYDROGEN One. To set up the fingerprint reader proceed with the following steps:

  1. Open settings
  2. Touch Security & location
  3. Touch Fingerprint under the Device security section
  4. Touch Next and select which security combination to use
  5. Choose if you want to have the password asked at the startup screen
  6. Set the password/passcode then confirm it
  7. Select if you want specific content is to be displayed when locked
  8. Then begin touching the fingerprint scanner multiple times until complete

Angle your fingerprint in multiple ways to improve the accuracy of the fingerprint scanner. Also keep in mind that if you restart your phone, the initial unlock will require the password that you used in combination to the fingerprint scanner. You can add up to 5 fingerprints or use multiple prints on one set up. This may however reduce the accuracy.

Have more questions? Submit a request


Article is closed for comments.